DJB Labcare

* * *
Heraeus BB 15 CO2 Incubator 230V Solid Copper inner chamber                                                                                                                   BB 15 CO2 INCUBATOR 230V CU (HERAEUS) Heraeus BB 15 CO2 Incubator 230V Solid Copper inner chamber                                                                                                                   BB 15 CO2 INCUBATOR 230V CU (HERAEUS)

PDFDatasheet ( PDF)

Get a sales quote for this product

Heraeus BB 15 CO2 Incubator 230V Solid Copper inner chamber BB 15 CO2 INCUBATOR 230V CU (HERAEUS) 51023122

Our Heraeus BB 15 Function Line CO2 incubator provides everything you need for the good growth of cell and tissue cultures.
Solid copper inner chamber

Details

Major Features

• Precise temperature and CO2 control for optimal growth conditions
• Powerful humidification system for short recovery times
• Stainless steel inner chamber

Temperature Control

  • A precise Pt 1000 temperature sensor controls the air jacket heating for constant temperature.

  • In case of failure, the system is equipped with a second circuit, taking over control to keep the temperature at the preset value.

CO2 Control

  • The CO2 concentration is measured with a highly reliable TCD sensor. The sensor is auto calibrated on every auto-start routine.

Humidification

  • For reducing the surface area, the water pan has been eliminated and the bottom of the chamber is used as a water reservoir.

  • Therefore, a quicker evaporation rate has been achieved, through a greater water surface area and supported by the direct heat transfer from the bottom of the chamber.

Minimal Surface

  • The BB 15 chamber is consequently designed for a less contamination-prone surface area.

  • It doesn’t have any air ducts and no duplicate side walls.

  • The shelf system has been reduced to the absolute minimum. Even the water pan has been eliminated. Therefore, the BB 15 has up to 50% less surface than other incubators.

Easy to Clean

  • The chamber has a high quality electropolished finish resulting in a very smooth surface.

  • All corners and edges are coved; there are no bolts or screws inside.

  • All door gaskets can be easily removed and reinstalled, making cleaning easy

Easy to Use

  • The shelf system is easy to mount and take off. The shelves contain a travel stop to avoid tipping when dragged out too far.

  • The back of the chamber is equipped with a 42mm (1.7 inch) access port to facilitate installation of appliances within the chamber.

  • Large displays allow easy parameter control.

Solid Copper Interior

  • The BB 15 is available with a solid copper interior. The chamber, the shelving system, the fan and even the fan housing is made of solid copper.

  • Solid copper has been proven to show good antimicrobial activity. In the humid atmosphere the copper surface will slightly oxidize and microbes settling down on this surface get inactivated by the released copper ions. And because copper oxide is not volatile, it will not affect any cells in vessels or flasks that are not in contact with the copper surface.

  • This results in a very effective, permanent contamination control of the whole interior surface area.

Technical Specification

Volume (L): 151 (5.3 cu. ft)
Ambient temperature range (°C): +18 to 33
Temperature control range (°C): +3 to 55
Recovery time @ 5% CO2 (minutes): 5
External dimensions (W X D X H) (mm): 637 x 867 x 766
Internal dimensions (W X D X H) (mm): 470 x 607 x 530
Weight (kg): 70

Availability

New price

£6261.00

Manufacturer's list price. Please call our sales office for potential discounts that may apply.

Accessories for Heraeus BB 15 CO2 Incubator 230V Solid Copper inner chamber BB 15 CO2 INCUBATOR 230V CU (HERAEUS)

50057161, Support frame for double chamber, 185mm high Incubator accessories £662.00

Support frame for double chamber, 185mm high (with castors)

50051376, Support frame for double chamber 200mm high Incubator accessories £599.00

Support frame for double chamber, 200mm high (without castors)

50051436, Support frame for single chamber, 780mm high Incubator accessories £677.00

Support frame for single chamber, 780mm high (without castors)

50051910, Additional shelf, solid copper, full-width, with 2 support rails Incubator accessories £260.00

Additional shelf, solid copper, full-width, with 2 support rails

50051914, Set of 3 HERAtrays1/3 width in solid copper Incubator accessories £263.00

Set of 3 HERAtrays1/3 width in solid copper

50052528, Set of 4 locking castors swivel Incubator accessories £248.00

Set of 4 locking castors swivel, for support frames

© 2017 DJB Labcare Ltd. Terms of use & Privacy policy