DJB Labcare

* * *
CelCulture® Incubator, 50L, IR sensor, CO2 & O2 Control, Moist Heat Decon,  Water Jacketed, 230VAC, 50/60 Hz

PDFDatasheet (967.0kB PDF)

Get a sales quote for this product

CelCulture® Incubator, 50L, IR sensor, CO2 & O2 Control, Moist Heat Decon, Water Jacketed, 230VAC, 50/60 Hz CCL-050T-8-WJ

Esco CelCulture® Water-Jacketed CO2 Incubator provides a very stable environment to grow and maintain cell cultures.


Water-Jacketed CO2 Incubator can maintain temperature by surrounding the chamber by hot walls generated from the heated water. The heated water circulates and radiates heat around the inner chamber which maintains constant temperature.
Water-Jacketed CO2 Incubator can hold the chamber temperature much longer when power is lost. The CO2 incubator will also be able to recover temperature much faster after power failure as it also gets back more quickly as temperature settings change due to frequent opening of the door.

Key features

More Stable Temperature Control

  • Faster temperature recovery times after power outage and door openings.

  • Better temperature uniformity

Increased Security
*Hold a set temperature inside the chamber much longer than air-jacketed units in the event of power failure.

Complete Contamination Control Methods

  • ULPA filter

  • 0.2 micron inline filter

  • ISOCIDETM antimicrobial coating.

  • 90°C Moist Heat Decon Cycle (water in the external chamber needs to be drained first)


  • The unit is equipped with a fill-in port to place water and a drain valve to facilitate faster depletion of water when cleaning, before decon cycle or before transporting the equipment.

Easy Monitoring

  • Water level can be check via the water level sensor.

O2 Sensor
• Long life
• Stable output signal
• Not affected by CO2 concentration inside the chamber

Technical Specification

  • Volume: 50 litre (1.8 cu.ft)

  • Temperature Range Ambient:18 to 34°C (64 to 93°F)

  • Temperature Control method: Direct Heat and Water Jacketed using PID microprocessor

  • Temperature range: Ambient +3°C to 60°C

  • O2 Range, % O2: 1-20.7

  • O2 Sensor: Galvanic Cell Type

  • Recovery Time at 1% O2, (minutes): 10

  • Number of Shelves (standard)- 2

  • Maximum load per shelf (kg)- 4

  • Water jacket volume (L)- 10

  • External dimensions (W x D x H) (mm)- 500 x 500 x 705

  • Internal Dimensions (W x D x H) (mm)- 345 x 375 x 390

  • Weight (kg)- 75 (no water)


Available as New

Please call our sales office or request a quote online for pricing/discount information.

Accessories for CelCulture® Incubator, 50L, IR sensor, CO2 & O2 Control, Moist Heat Decon, Water Jacketed, 230VAC, 50/60 Hz

Electronic CO2 Analyser Electronic CO2 analysers

Electronic CO2 Analyser (worldwide), for CO2/temperature measurement (without temperature...

Electronic CO2 Analyser

5250001, Voyager software kit Incubator Accessories £206.00

Voyager software kit

COA-2024-F, Extra Stainless Steel Shelf, with 2 support rails (50L) Incubator Accessories £46.00

COA-2016-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/Temp Measurement (With Temp. Probe) Incubator Accessories £2570.00

COA-2017-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/RH/Temp Measurement (With Temp. Probe) Incubator Accessories £3085.00

(intro, product box text)

MRA-GA, Miri GA CO2/O2/Temp Validation Unit, 115/230VAC 50/60HZ (includes 1 pc gas tubing and 1 pc PT 1000 temperature cable) Incubator Accessories £5255.00

MRA-1101, 1 pc PT 1000 Temperature Cable Incubator Accessories £54.00

MRA-1003, 1 pc Gas Connection Tubing Incubator Accessories £27.00

© 2024 DJB Labcare Ltd. Terms of use & Privacy policy