DJB Labcare

* * *
CelCulture® Incubator IR Sensor (240L) CO2 Control, HEPA filter, stainless steel chamber, High Temp Decon (including stacking kit) CelCulture® Incubator IR Sensor (240L) CO2 Control, HEPA filter, stainless steel chamber, High Temp Decon (including stacking kit) CelCulture® Incubator IR Sensor (240L) CO2 Control, HEPA filter, stainless steel chamber, High Temp Decon (including stacking kit)

PDFBrochure (1.0MB PDF)

Get a sales quote for this product

CelCulture® Incubator IR Sensor (240L) CO2 Control, HEPA filter, stainless steel chamber, High Temp Decon (including stacking kit) CCL-240B-8

Sleek, reliable and intuitive, Esco CelCulture CO2 incubators provide all round sample protection that brings your scientific dreams one step closer to reality.

With a highly user-friendly software and a 2 year manufacturer's warranty the CelCulture® Incubator with TC sensor is a valuable addition to any cell culture lab.

Details

VivoCell™ Precise Parameter Control
Different lines represent different sensor positions inside the chamber. Esco CelCulture has uniformity of less than ± 0.2 oC
which means all the samples are evenly heated. Minimal fluctuation (± 0.1 oC) ensures temperature stability.

Fast CO2, temperature and humidity recovery
Precisely tuned sensor and software results in fast recovery of CO2 without overshoot. This ensures uniform CO2 levels even
with frequent incubator door openings. Similarly, temperature and humidity recoveries are twice as fast as conventional incubators.

Direct heat and air jacket
Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations.

SteriSafe™ ULPA filtration system
ULPA filter filters the chamber air continuously to keep chamber at ISO Class 5 cleanliness which ensures all contaminants from the room air and chamber air are filtered and only clean air is recirculated. ULPA filters operate at 99.999% efficiency, superior to conventional HEPA filters which are 99.99% efficient and the chamber achieves ISO Class 5 Cleanliness condition after a mere 13 minutes following a door closing.

Validated SwiftCon™ overnight decontamination cycle
Use of 90˚C moist heat kills most micro-organisms - the lower temperature causes less damage to electronic components,
therefore prolongs the life span of the incubator and has been independently proven to be as effective as high temperature
decontamination. The cycle completes within 15 hours leaving the chamber cool and dry with further wipe down required.

ISOCIDE™ antimicrobial coating
The chamber is made of type 304 stainless steel and the main body is electro galvanized steel with ISOCIDE™ antimicrobial coating. Esco ISOCIDE™ is an antimicrobial inhibitor that eliminates 99.9% surface bacteria within 24 hours of exposure, it is integrated into the coating and cannot be washed out or diminished by repeated cleaning.

User - Friendly Software Interface

Availability

New price

£5402.00

Manufacturer's list price. Please call our sales office for potential discounts that may apply.

Accessories for CelCulture® Incubator IR Sensor (240L) CO2 Control, HEPA filter, stainless steel chamber, High Temp Decon (including stacking kit)

COA-1001, Humidity display Incubator accessories £361.00

Humidity display, factory installed

Humidity display

COA-1001-F, Humidity display Incubator accessories £361.00

Humidity display, field install kit

Humidity display

COA-1002, CO2 Backup Incubator accessories £407.00

CO2 Backup (tank switcher), factory installed

CO2 Backup

COA-1002-F, CO2 Backup Incubator accessories £407.00

CO2 Backup (tank switcher), field installed

CO2 Backup

COA-1004, Reversed door swing Incubator accessories £95.00

Reversed door swing, factory installed

COA-1005, Analog Outputs Incubator accessories £304.00

Analog Outputs, factory installed

Analog Outputs

COA-1005-F, Analog Outputs Incubator accessories £304.00

Analog Outputs, field installed

Analog Outputs

COA-1006, Sealed inner door kit Incubator accessories £1231.00

Sealed inner door kit (4 glass doors with latches), factory installed

Sealed inner door kit

COA-2005-F, 2-Stage gas regulator Incubator accessories £258.00

2-Stage gas regulator for CO2/N2

2-Stage gas regulator

COA-2007-F, Extra shelf Incubator accessories £77.00

Extra shelf

Extra shelf

COA-2008-F, Stacking kit Incubator accessories £87.00

Stacking kit

Stacking kit

COA-2012-F, 6" Chart Recorder Incubator accessories £716.00

6" Chart Recorder, temperature, 115/230VAC 50/60HZ

6" Chart Recorder

COA-2013-F, 8" Chart Recorder Incubator accessories £1025.00

8" Chart Recorder, temperature/temperature, 115/230VAC 50/60HZ

8" Chart Recorder

COA-2014-F, 6" Chart Recorder Incubator accessories £716.00

6" Chart Recorder, temperature/RH, 115/230VAC 50/60HZ

6" Chart Recorder

COA-2015-F, Inner door shelving kit Incubator accessories £304.00

Inner door shelving kit (4 sets with total 12 mini shelves for one incubator)

Inner door shelving kit

COA-2018-F, Roller Base Stand (50L) Incubator accessories £283.00

Accessory, Roller Base (for 50L)

Roller Base Stand (50L)

COA-2022-F, Incubator Floor stand (50L) Incubator accessories £304.00

Accessory, Floor Stand 700mm (for 50L)

Incubator Floor stand (50L)

5250001, Voyager software kit Incubator accessories £206.00

Voyager software kit

COA-2025-F, Extra Stainless Steel Shelf, with 2 support rails (240L) Incubator accessories £129.00

COA-2016-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/Temp Measurement (With Temp. Probe) Incubator accessories £2570.00

COA-2017-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/RH/Temp Measurement (With Temp. Probe) Incubator accessories £3085.00

(intro, product box text)

MRA-GA, Miri GA CO2/O2/Temp Validation Unit, 115/230VAC 50/60HZ (includes 1 pc gas tubing and 1 pc PT 1000 temperature cable) Incubator accessories £5255.00

MRA-1101, 1 pc PT 1000 Temperature Cable Incubator accessories £54.00

MRA-1003, 1 pc Gas Connection Tubing Incubator accessories £27.00

© 2017 DJB Labcare Ltd. Terms of use & Privacy policy