Datasheet (1.0MB PDF)
CelCulture® CO2 Incubator, (170L), IR Sensor, CO2 Control, no filter, stainless steel chamber, High Temp Decon (including stacking kit) CCL-170B-8-NF
Sleek, reliable and intuitive, Esco CelCulture CO2 incubators provide all round sample protection that brings your scientific dreams one step closer to reality.
With a highly user-friendly software and a 2 year manufacturer's warranty the CelCulture® Incubator with TC sensor is a valuable addition to any cell culture lab.
Details
VivoCell™ Precise Parameter Control
Different lines represent different sensor positions inside the chamber. Esco CelCulture has uniformity of less than ± 0.2 oC
which means all the samples are evenly heated. Minimal fluctuation (± 0.1 oC) ensures temperature stability.
Fast CO2, temperature and humidity recovery
Precisely tuned sensor and software results in fast recovery of CO2 without overshoot. This ensures uniform CO2 levels even
with frequent incubator door openings. Similarly, temperature and humidity recoveries are twice as fast as conventional incubators.
Direct heat and air jacket
Direct heating enables rapid temperature recovery while air jacket provides isolation against ambient temperature fluctuations.
SteriSafe™ ULPA filtration system
ULPA filter filters the chamber air continuously to keep chamber at ISO Class 5 cleanliness which ensures all contaminants from the room air and chamber air are filtered and only clean air is recirculated. ULPA filters operate at 99.999% efficiency, superior to conventional HEPA filters which are 99.99% efficient and the chamber achieves ISO Class 5 Cleanliness condition after a mere 13 minutes following a door closing.
Validated SwiftCon™ overnight decontamination cycle
Use of 90˚C moist heat kills most micro-organisms - the lower temperature causes less damage to electronic components,
therefore prolongs the life span of the incubator and has been independently proven to be as effective as high temperature
decontamination. The cycle completes within 15 hours leaving the chamber cool and dry with further wipe down required.
ISOCIDE™ antimicrobial coating
The chamber is made of type 304 stainless steel and the main body is electro galvanized steel with ISOCIDE™ antimicrobial coating. Esco ISOCIDE™ is an antimicrobial inhibitor that eliminates 99.9% surface bacteria within 24 hours of exposure, it is integrated into the coating and cannot be washed out or diminished by repeated cleaning.
User - Friendly Software Interface
Availability
Available as New
Please call our sales office or request a quote online for pricing/discount information.
Accessories for CelCulture® CO2 Incubator, (170L), IR Sensor, CO2 Control, no filter, stainless steel chamber, High Temp Decon (including stacking kit)
COA-1001, Humidity display Incubator AccessoriesHumidity display, factory installed |
|
COA-1001-F, Humidity display Incubator AccessoriesHumidity display, field install kit |
|
COA-1002, CO2 Backup Incubator AccessoriesCO2 Backup (tank switcher), factory installed |
|
COA-1002-F, CO2 Backup Incubator AccessoriesCO2 Backup (tank switcher), field installed |
|
COA-1004, Reversed door swing Incubator AccessoriesReversed door swing, factory installed |
|
COA-1005, Analog Outputs Incubator AccessoriesAnalog Outputs, factory installed |
|
COA-1005-F, Analog Outputs Incubator AccessoriesAnalog Outputs, field installed |
|
COA-1006, Sealed inner door kit Incubator AccessoriesSealed inner door kit (4 glass doors with latches), factory installed |
|
COA-2001-F, Roller Base Stand (170L) Incubator AccessoriesAccessory, Roller Base (for 170L) |
|
COA-2002-F, Incubator Floor stand (170L) Incubator AccessoriesAccessory, Floor Stand (8" Adjustable Feet) (for 170L) |
|
COA-2003-F, Incubator Floor stand (170L) Incubator Accessories £420.00Accessory, Floor Stand 700mm (for 170L) |
|
COA-2005-F, 2-Stage gas regulator Incubator Accessories2-Stage gas regulator for CO2/N2 |
|
COA-2007-F, Extra shelf Incubator AccessoriesExtra shelf |
|
COA-2008-F, Stacking kit Incubator AccessoriesStacking kit |
|
COA-2012-F, 6" Chart Recorder Incubator Accessories6" Chart Recorder, temperature, 115/230VAC 50/60HZ |
|
COA-2013-F, 8" Chart Recorder Incubator Accessories8" Chart Recorder, temperature/temperature, 115/230VAC 50/60HZ |
|
COA-2014-F, 6" Chart Recorder Incubator Accessories6" Chart Recorder, temperature/RH, 115/230VAC 50/60HZ |
|
COA-2015-F, Inner door shelving kit Incubator AccessoriesInner door shelving kit (4 sets with total 12 mini shelves for one incubator) |
|
5250001, Voyager software kit Incubator Accessories £206.00Voyager software kit |
|
COA-2016-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/Temp Measurement (With Temp. Probe) Incubator Accessories £2570.00 |
|
COA-2017-F, Electronic CO2 Analyzer (Worldwide), For CO2/O2/RH/Temp Measurement (With Temp. Probe) Incubator Accessories £3085.00(intro, product box text) |
|
MRA-GA, Miri GA CO2/O2/Temp Validation Unit, 115/230VAC 50/60HZ (includes 1 pc gas tubing and 1 pc PT 1000 temperature cable) Incubator Accessories £5255.00 |
|
MRA-1101, 1 pc PT 1000 Temperature Cable Incubator Accessories £54.00 |
|
MRA-1003, 1 pc Gas Connection Tubing Incubator Accessories £27.00 |